© TDT Machine Tools Limited
All Rights Reserved | Design by eSterling
Lagun CM – CL
Travelling Column Universal Bed Mill
Features
- X-travel/bed length from 4,000mm to 12,000mm
- Up to 1,500mm across the bed
- Fully programmable heads to from 1.0 to 0.001 degree
Universal travelling column milling machine with fixed table
The CM - CL machine is a universal milling machine with a travelling column and fixed table with a high load capacity. This type of machine enables machining of parts of up to 12 meters in length, virtually without any restrictions with regards to the weight of the workpiece as the slide-column set performs the longitudinal movement.
· X-travel from 4 m to 12 m.
· Table bed of 1500 mm more than the travel, so that the X-axis slide supporting the column is always guided on the bed (1635 mm in CL).
· Table width 1100 mm on CM and 1300 mm on CL.
The CM-CL milling machine enables pendulum working mode, i.e. two separate and independently protected working areas are available. Thus it is possible for the machine to operate in one area while the operator sets up the next workpiece in the adjacent area. Front and side enclosure fixed to the machine with two front doors with opening for the machine travel.
· Control panel in cabin, suspended on an articulated arm which can be moved to the front for work in manual mode or closer inspection. Optionally a double control panel can be provided: one fixed in the cabin and the other at the front sliding along the table bed.
· Machine solution for machining long and/or bulky and heavy workpieces. Also suitable for serial machining with Non-Stop system with pendulum work mode.
The CM - CL machine is a universal milling machine with a travelling column and fixed table with a high load capacity. This type of machine enables machining of parts of up to 12 meters in length, virtually without any restrictions with regards to the weight of the workpiece as the slide-column set performs the longitudinal movement.
· X-travel from 4 m to 12 m.
· Table bed of 1500 mm more than the travel, so that the X-axis slide supporting the column is always guided on the bed (1635 mm in CL).
· Table width 1100 mm on CM and 1300 mm on CL.
The CM-CL milling machine enables pendulum working mode, i.e. two separate and independently protected working areas are available. Thus it is possible for the machine to operate in one area while the operator sets up the next workpiece in the adjacent area. Front and side enclosure fixed to the machine with two front doors with opening for the machine travel.
· Control panel in cabin, suspended on an articulated arm which can be moved to the front for work in manual mode or closer inspection. Optionally a double control panel can be provided: one fixed in the cabin and the other at the front sliding along the table bed.
· Machine solution for machining long and/or bulky and heavy workpieces. Also suitable for serial machining with Non-Stop system with pendulum work mode.
Enquire about Lagun CM – CL
If you have any questions about this product, please fill out the form below and we will get back to you as soon as possible.
